Complement your MAURER pyrometer with an electronic process unit and benefit from numerous functions. With this device you have all relevant data immediately in view. Adjusting the settings can be easily done thanks to the intuitive handling of the menu navigation. In addition, it enables you to record measured data and set the parameters for your pyrometer effortlessly and without a computer. For further control purposes, a large amount of data and signals can be tapped or fed from an external source via the terminal block on the rear side.
AED1012-C
Description
Features and characteristics of model AED 1012-C:
-
- PID Controller with set-point value setting (manually – external)
- Autotuning feature for automatic determination of PI-parameters
- Display unit: gives an overview of all important information
- Overall parameter setting of pyrometer without computer possible
- 2 seperately adjustable switch outputs with optorelais
- Works as voltage supply for the pyrometer
- Digital pyrometer interface RS232 or RS485
- Authorization management with optional PIN protection against unauthorized access
- Automatic determination of emissivity and transmission
- Data logging to USB flash drive with real time clock
- Ultra fast sampling rate of 50 µsec
- Multilingual Touchpanel
- 6-digit temperature display °C / °F
| Pyrometer interface | RS232 / RS485, switchable | ||
| Computer Interface | USB 2.0 Optional: ProfiBUS, ProfiNET, Ethernet, Ethercat |
||
| Data recording |
Recording on USB flash drive or PC, with real time clock
|
||
| Input of actual value |
Current loop of pyrometer (0 – 20 mA or 4 – 20 mA / input impendance 20 R)
|
||
| Measurement indication |
6-digit programmable, adjustable display rate 100 ms – 10 s
|
||
| Sampling time | 100 µsec | ||
| PID parameters | xp: 1 – 1000 % ti: 0,1 – 9999 ms td: 0,1 – 9999ms P: 0 – 100 % | ||
| Program step length | 1 ms to 3600 ms | ||
| Measuring range | Manual scaling for analogue pyrometers from -50 °C to 4000 °C | ||
| Automatic scaling for digital pyrometers | |||
| Switching output | Set points adjustable within measuring range | ||
| 2 x optorelais (optional 4 x) with changeover contacts, each 60 VAC / 100 mA | |||
| 1 x optorelais pyrometer limit | |||
| Switching hysteresis: Adjustable between 0 – 50 °C, Response time 3 ms | |||
| Operating / Storage temperature | 0 – 60 °C / -10 °C – 70 °C | ||
| Supply voltage | 100 – 277 VAC / 50 – 60 Hz | ||
| Power consumption | Max. 20 W | ||
| Power supply for pyrometer | + 24 V / 300 mA (D-SUB) | ||
| Signal outputs | via 16-pol. screw terminal block | ||
| IP Code | IP50 | ||
| Weight / dimensions (LxHxW) | Standard: 1,3 kg / 155,5 x 69 x 204 mm (height with foots: 104 mm) | ||
| DIN-version: 1,1 kg / 96 x 96 x 170 mm (width with power supply connector: 235mm) panel cutout: 92 x 92 mm |
|||
AED1012 – standard housing
AED1012 – DIN housing
